DIY Manual Paper Quilling Machine Paper Art Tassel Handmade Color Cutting Paper

Description

DIY Manual Paper Quilling Machine Paper Art Tassel Handmade Color Cutting Paper
Description
Product name: Paper quilling tassel machine
Product size: 95mm*70mm*85mm
Product packaging: 1 piece/bag
Tassel size: 0.25mm-2.2mm
Cutting method: manual cutting
Product weight: 0.27KG
Material: aviation aluminum + same + alloy steel + rubber
Paper size: 4mm-14mm
1. Durable
Scissor-type cutter, which can reduce the wear between the blades, greatly prolong the service life of the blade and the machine.
2. Cut paper flat
Patented paper feeding technology, the cut tassel is smooth and not warped.
3. Adjustable
Knob screw, adjustable tassel width, narrow, long, short
4. Safety
Manual cutting, no power supply required, safe and environmentally friendly!
Scissor-type cutting knife, no blade is safe and secure!
Fully manual debugging and polishing to ensure that each one is a fine product
Bearing structure cutting is smooth, experience manual fun!
Usage method
1.Loosen the screws
,Pull the baffle outward.
2.Comb the quilling strip
with your hand, so that
the head is slightly tilted
upwards
(Make sure the paper head
is flat, no glue head)
3.Pass the quilling strip
under the paper guide
column and send it all the
way to the roller
(If the paper is not easy to
deliver, you can use tweezers
or a small tool to assist the
operation)
deliver, you can use tweezers
or a small tool to assist the
operation)
4.Press down on the paper
spool with your thumb
and middle finger, and
continue to feed the paper
strip to the right side of
the roller
5.Push the baffle inwards
against the quilling paper,
and tighten the screws
lightly
(note that the
baffle can only lean against
the quivering paper lightly,
not too tight)
baffle can only lean against
the quivering paper lightly,
not too tight)
6.Start cropping(When cutting, you can
put the machine flat on
the table to cut, or you
can hold it in your hand
to cut)
Package Includes:
1 x Manual Paper Quilling Machine
For any question please contact us